Skip to content

Reading and Searching Resources

To retrieve an existing resource, the HTTP method GET has to be used. Reading resources may require authentication, since some resources may have restricted viewing permissions.

Responses Describing Resources

Resources can be returned in JSON-LD, Turtle, or RDF/XML, using HTTP content negotiation (see Response Formats).

Operations for reading and searching resources can return responses in either the simple or the complex ontology schema. The complex schema is used by default. To receive a response in the simple schema, use the HTTP request header or URL parameter described in API Schema.

Each DSP-API v2 response describing one or more resources returns a single RDF graph. For example, a request for a single resource returns that resource and all its values. In a full-text search, the resource is returned with the values that matched the search criteria. A response to an extended search may represent a whole graph of interconnected resources.

In JSON-LD, if only one resource is returned, it is the top-level object; if more than one resource is returned, they are represented as an array of objects of the @graph member of the top-level object (see Named Graphs in the JSON-LD specification).

In the complex schema, dependent resources, i.e. resources that are referred to by other resources on the top level, are nested in link value objects. If resources on the top level are referred to by other resources and these links are part of the response, virtual incoming links are generated; see Gravsearch: Virtual Graph Search).

See the interfaces Resource and ResourcesSequence in module ResourcesResponse (exists for both API schemas: ApiV2Simple and ApiV2WithValueObjects).

Text Markup Options

Text markup can be returned in one of two ways:

Embedded XML is the default.

Requesting Text Markup as XML

When requesting a text value with standoff mark up, there are three possibilities:

  1. The text value uses standard mapping.
  2. The text value uses a custom mapping which does not specify an XSL transformation.
  3. The text value uses a custom mapping which specifies an XSL transformation.

In the first case, the mapping will be defined as:

"kb:textValueHasMapping": {
        "@id": "http://rdfh.ch/standoff/mappings/StandardMapping"
    }

the text value will only be available as kb:textValueAsXml, which will be of the following structure:

<?xml version="1.0" encoding="UTF-8"?>
<text documentType="html">
   ...
</text>

where the content of <text> is a limited set of HTML tags that can be handled by CKEditor in DSP-APP. This allows for both displaying and editing the text value.

In the second and third case, kb:textValueHasMapping will point to the custom mapping that may or may not specify an XSL transformation.

If no transformation is specified (second case), the text value will be returned only as kb:textValueAsXml. This property will be a string containing the contents of the initially uploaded XML.

Note: The returned XML document is equivalent to the uploaded document but it is not necessarily identical - the order of the attributes in one element may vary from the original.

In the third case, when a transformation is specified, both kb:textValueAsXml and kb:textValueAsHtml will be returned. kb:textValueAsHtml is the result of the XSL transformation applied to kb:textValueAsXml. The HTML representation is intended to display the text value in a human readable and properly styled way, while the XML representation can be used to update the text value.

Requesting Text Markup as Standoff

Implementation of support for standoff/RDF in API v2 is in its early stages; its use is currently discouraged. The basic procedure works like this:

First, request a resource in the complex schema, using any relevant API v2 route, submitting the string standoff as the value of either:

  • the HTTP header X-Knora-Accept-Markup

  • the URL parameter markup

If a text value in the resource contains markup, the text value will look something like this:

{
  "@id" : "http://rdfh.ch/0001/LK-wKXDNQJaRHOf0F0aJ2g/values/1Er1OpVwQR2u6peTwyNpJw",
  "@type" : "knora-api:TextValue",
  "knora-api:attachedToUser" : {
    "@id" : "http://rdfh.ch/users/9XBCrDV3SRa7kS1WwynB4Q"
  },
  "knora-api:hasPermissions" : "CR knora-admin:Creator|V knora-admin:UnknownUser",
  "knora-api:textValueHasMarkup" : true,
  "knora-api:textValueHasMaxStandoffStartIndex" : 6737,
  "knora-api:userHasPermission" : "CR",
  "knora-api:valueAsString" : "\nHamlet\nACT I\nSCENE I. Elsinore. A platform before the castle...",
  "knora-api:valueCreationDate" : {
    "@type" : "xsd:dateTimeStamp",
    "@value" : "2019-05-08T17:08:32.158401Z"
  }
}

The object knora-api:valueAsString contains the text without markup. The predicate knora-api:textValueHasMarkup indicates that the text value has markup, and the value of the predicate knora-api:textValueHasMaxStandoffStartIndex gives the start index of the last standoff tag; this gives the client some idea of how much markup there is.

You can then request the text value's standoff/RDF, which is returned in pages of a limited size. To get each page:

HTTP GET to http://host/v2/standoff/RESOURCE_IRI/TEXT_VALUE_IRI/OFFSET

Both RESOURCE_IRI and TEXT_VALUE_IRI must be URL-encoded. The offset is an integer whose initial value is 0. The response will look like this:

{
  "@graph" : [ {
    "@type" : "http://api.knora.org/ontology/standoff/v2#StandoffRootTag",
    "knora-api:standoffTagHasEnd" : 184716,
    "knora-api:standoffTagHasStart" : 0,
    "knora-api:standoffTagHasStartIndex" : 0,
    "knora-api:standoffTagHasUUID" : "sbBzeAaNTzaUXl90UtlYzw"
  }, {
    "@type" : "http://api.knora.org/ontology/standoff/v2#StandoffHeader1Tag",
    "knora-api:standoffTagHasEnd" : 7,
    "knora-api:standoffTagHasStart" : 1,
    "knora-api:standoffTagHasStartIndex" : 1,
    "knora-api:standoffTagHasStartParentIndex" : 0,
    "knora-api:standoffTagHasUUID" : "HhXjcdSTS_G6eSQ0apdjUw"
  }, {
    "@type" : "http://api.knora.org/ontology/standoff/v2#StandoffHeader3Tag",
    "knora-api:standoffTagHasEnd" : 14,
    "knora-api:standoffTagHasStart" : 9,
    "knora-api:standoffTagHasStartIndex" : 2,
    "knora-api:standoffTagHasStartParentIndex" : 0,
    "knora-api:standoffTagHasUUID" : "Ymr2aDUqTx6nMwGZGiqduA"
  }, {
    "@type" : "http://api.knora.org/ontology/standoff/v2#StandoffHeader3Tag",
    "knora-api:standoffTagHasEnd" : 64,
    "knora-api:standoffTagHasStart" : 16,
    "knora-api:standoffTagHasStartIndex" : 3,
    "knora-api:standoffTagHasStartParentIndex" : 0,
    "knora-api:standoffTagHasUUID" : "_Zk0B1edRK6mgdtokmosXg"
  }, {
    "@type" : "http://api.knora.org/ontology/standoff/v2#StandoffBlockquoteTag",
    "knora-api:standoffTagHasEnd" : 112,
    "knora-api:standoffTagHasStart" : 66,
    "knora-api:standoffTagHasStartIndex" : 4,
    "knora-api:standoffTagHasStartParentIndex" : 0,
    "knora-api:standoffTagHasUUID" : "1DLdI0LJTCy07w6ZsOM_Sg"
  }, {
    "@type" : "http://api.knora.org/ontology/standoff/v2#StandoffItalicTag",
    "knora-api:standoffTagHasEnd" : 111,
    "knora-api:standoffTagHasStart" : 67,
    "knora-api:standoffTagHasStartIndex" : 5,
    "knora-api:standoffTagHasStartParentIndex" : 4,
    "knora-api:standoffTagHasUUID" : "XJ6GVO1VQSqrTyLHGnHqcA"
  } ],
  "knora-api:nextStandoffStartIndex" : 100,
  "@context" : {
    "rdf" : "http://www.w3.org/1999/02/22-rdf-syntax-ns#",
    "rdfs" : "http://www.w3.org/2000/01/rdf-schema#",
    "xsd" : "http://www.w3.org/2001/XMLSchema#",
    "knora-api" : "http://api.knora.org/ontology/knora-api/v2#"
  }
}

See Text with Standoff Markup for details of the predicates in each standoff tag.

If there are more pages of standoff to be requested, the response will contain knora-api:nextStandoffStartIndex, whose object should be submitted as the next OFFSET to the same route. This continues until you receive a response without knora-api:nextStandoffStartIndex.

Get the Representation of a Resource by IRI

Get a Full Representation of a Resource by IRI

A full representation of resource can be obtained by making a GET request to the API providing its IRI. Because a Knora IRI has the format of a URL, its IRI has to be URL-encoded.

To get the resource with the IRI http://rdfh.ch/c5058f3a (a book from the sample Incunabula project, which is included in the Knora API server's test data), make a HTTP GET request to the resources route (path segment resources in the API call) and append the URL-encoded IRI:

HTTP GET to http://host/v2/resources/http%3A%2F%2Frdfh.ch%2Fc5058f3a

If necessary, several resources can be queried at the same time, their IRIs separated by slashes. Please note that the amount of resources that can be queried in one requested is limited. See the settings for app/v2 in application.conf.

More formally, the URL looks like this:

HTTP GET to http://host/v2/resources/resourceIRI(/anotherResourceIri)*

Get a Full Representation of a Version of a Resource by IRI

To get a specific past version of a resource, use the route described in Get a Full Representation of a Resource by IRI, and add the URL parameter ?version=TIMESTAMP, where TIMESTAMP is an xsd:dateTimeStamp in the UTC timezone. The timestamp can either be URL-encoded, or submitted with all punctuation (-, :, and .) removed (this is to accept timestamps from Knora's ARK URLs).

The resource will be returned with the values that it had at the specified time. Since Knora only versions values, not resource metadata (e.g. rdfs:label), the current metadata will be returned.

Each value will be returned with the permissions that are attached to the current version of the value (see Permissions).

The returned resource will include the predicate knora-api:versionDate, containing the timestamp that was submitted, and its knora-api:versionArkUrl (see Resource Permalinks) will contain the same timestamp.

Get a Value in a Resource

To get a specific value of a resource, use this route:

HTTP GET to http://host/v2/values/resourceIRI/valueUUID

The resource IRI must be URL-encoded. The path element valueUUID is the string object of the value's knora-api:valueHasUUID.

The value will be returned within its containing resource, in the same format as for Responses Describing Resources, but without any of the resource's other values.

Get a Version of a Value in a Resource

To get a particular version of a specific value of a resource, use the route described in Get a Value in a Resource, and add the URL parameter ?version=TIMESTAMP, where TIMESTAMP is an xsd:dateTimeStamp in the UTC timezone. The timestamp can either be URL-encoded, or submitted with all punctuation (-, :, and .) removed (this is to accept timestamps from Knora's ARK URLs).

The value will be returned within its containing resource, in the same format as for Responses Describing Resources, but without any of the resource's other values.

Since Knora only versions values, not resource metadata (e.g. rdfs:label), the current resource metadata will be returned.

The value will be returned with the permissions that are attached to its current version (see Permissions).

Get the Version History of a Resource

To get a list of the changes that have been made to a resource since its creation, use this route:

HTTP GET to http://host/v2/resources/history/resourceIRI[?startDate=START_DATE&endDate=END_DATE]

The resource IRI must be URL-encoded. The start and end dates are optional, and are URL-encoded timestamps in xsd:dateTimeStamp format. The start date is inclusive, and the end date is exclusive. If the start date is not provided, the resource's history since its creation is returned. If the end date is not provided, the resource's history up to the present is returned.

The response is a list of changes made to the resource, in reverse chronological order. Each entry has the properties knora-api:author (the IRI of the user who made the change) and knora-api:versionDate (the date when the change was made). For example:

{
  "@graph" : [ {
    "knora-api:author" : {
      "@id" : "http://rdfh.ch/users/BhkfBc3hTeS_IDo-JgXRbQ"
    },
    "knora-api:versionDate" : {
      "@type" : "xsd:dateTimeStamp",
      "@value" : "2019-02-11T09:05:10Z"
    }
  }, {
    "knora-api:author" : {
      "@id" : "http://rdfh.ch/users/9XBCrDV3SRa7kS1WwynB4Q"
    },
    "knora-api:versionDate" : {
      "@type" : "xsd:dateTimeStamp",
      "@value" : "2019-02-10T10:30:10Z"
    }
  }, {
    "knora-api:author" : {
      "@id" : "http://rdfh.ch/users/BhkfBc3hTeS_IDo-JgXRbQ"
    },
    "knora-api:versionDate" : {
      "@type" : "xsd:dateTimeStamp",
      "@value" : "2019-02-10T10:05:10Z"
    }
  } ],
  "@context" : {
    "rdf" : "http://www.w3.org/1999/02/22-rdf-syntax-ns#",
    "rdfs" : "http://www.w3.org/2000/01/rdf-schema#",
    "xsd" : "http://www.w3.org/2001/XMLSchema#",
    "knora-api" : "http://api.knora.org/ontology/knora-api/v2#"
  }
}

The entries include all the dates when the resource's values were created or modified (within the requested date range), as well as the date when the resource was created (if the requested date range allows it). Each date is included only once. Since Knora only versions values, not resource metadata (e.g. rdfs:label), changes to a resource's metadata are not included in its version history.

To request the resource as it was at each of these dates, see Get a Full Representation of a Version of a Resource by IRI. For consistency in citation, we recommend using these dates when requesting resource versions.

Get the preview of a resource by IRI

In some cases, the client may only want to request the preview of a resource, which just provides its metadata (e.g. its IRI, rdfs:label, and type), without its values.

This works exactly like making a conventional resource request, using the path segment resourcespreview:

HTTP GET to http://host/v2/resourcespreview/resourceIRI(/anotherResourceIri)*

Get a Graph of Resources

Knora can return a graph of connections between resources, e.g. for generating a network diagram.

HTTP GET to http://host/v2/graph/resourceIRI[depth=Integer]
[direction=outbound|inbound|both][excludeProperty=propertyIri]

The first parameter must be preceded by a question mark ?, any following parameter by an ampersand &.

  • depth must be at least 1. The maximum depth is an Knora configuration setting. The default is 4.
  • direction specifies the direction of the links to be queried, i.e. links to and/or from the given resource. The default is outbound.
  • excludeProperty is an optional link property to be excluded from the results.

To accommodate large graphs, the graph response format is very concise, and is therefore simpler than the usual resources response format. Each resource represented only by its IRI, class, and label. Direct links are shown instead of link values. For example:

{
  "@graph" : [ {
    "@id" : "http://rdfh.ch/0001/0C-0L1kORryKzJAJxxRyRQ",
    "@type" : "anything:Thing",
    "rdfs:label" : "Sierra"
  }, {
    "@id" : "http://rdfh.ch/0001/A67ka6UQRHWf313tbhQBjw",
    "@type" : "anything:Thing",
    "rdfs:label" : "Victor"
  }, {
    "@id" : "http://rdfh.ch/0001/Lz7WEqJETJqqsUZQYexBQg",
    "@type" : "anything:Thing",
    "rdfs:label" : "Foxtrot"
  }, {
    "@id" : "http://rdfh.ch/0001/WLSHxQUgTOmG1T0lBU2r5w",
    "@type" : "anything:Thing",
    "anything:hasOtherThing" : {
      "@id" : "http://rdfh.ch/0001/A67ka6UQRHWf313tbhQBjw"
    },
    "rdfs:label" : "Tango"
  }, {
    "@id" : "http://rdfh.ch/0001/start",
    "@type" : "anything:Thing",
    "anything:hasOtherThing" : [ {
      "@id" : "http://rdfh.ch/0001/0C-0L1kORryKzJAJxxRyRQ"
    }, {
      "@id" : "http://rdfh.ch/0001/WLSHxQUgTOmG1T0lBU2r5w"
    }, {
      "@id" : "http://rdfh.ch/0001/tPfZeNMvRVujCQqbIbvO0A"
    } ],
    "rdfs:label" : "Romeo"
  }, {
    "@id" : "http://rdfh.ch/0001/tPfZeNMvRVujCQqbIbvO0A",
    "@type" : "anything:Thing",
    "anything:hasOtherThing" : {
      "@id" : "http://rdfh.ch/0001/Lz7WEqJETJqqsUZQYexBQg"
    },
    "rdfs:label" : "Echo"
  } ],
  "@context" : {
    "rdf" : "http://www.w3.org/1999/02/22-rdf-syntax-ns#",
    "knora-api" : "http://api.knora.org/ontology/knora-api/v2#",
    "rdfs" : "http://www.w3.org/2000/01/rdf-schema#",
    "xsd" : "http://www.w3.org/2001/XMLSchema#",
    "anything" : "http://0.0.0.0:3333/ontology/0001/anything/v2#"
  }
}

Search for Resources

Search for a Resource by its rdfs:label

Knora offers the possibility to search for resources by their rdfs:label. The use case for this search is to find a specific resource as you type. E.g., the user wants to get a list of resources whose rdfs:label contain some search terms separated by a whitespace character:

  • Zeit
  • Zeitg
  • ...
  • Zeitglöcklein d
  • ...
  • Zeitglöcklein des Lebens

With each character added to the last term, the selection gets more specific. The first term should at least contain four characters. To make this kind of "search as you type" possible, a wildcard character is automatically added to the last search term. Search by label automatically adds Lucene operators, search strings are expected not to contain any characters with a special meaning in Lucene Query Parser syntax.

HTTP GET to http://host/v2/searchbylabel/searchValue[limitToResourceClass=resourceClassIRI]
[limitToProject=projectIRI][offset=Integer]

The first parameter must be preceded by a question mark ?, any following parameter by an ampersand &.

The default value for the parameter offset is 0, which returns the first page of search results. Subsequent pages of results can be fetched by increasing offset by one. The amount of results per page is defined in app/v2 in application.conf.

For performance reasons, standoff markup is not queried for this route.

To request the number of results rather than the results themselves, you can do a count query:

HTTP GET to http://host/v2/searchbylabel/count/searchValue[limitToResourceClass=resourceClassIRI][limitToProject=projectIRI][offset=Integer]

The response to a count query request is an object with one predicate, http://schema.org/numberOfItems, with an integer value.

Knora offers a full-text search that searches through all textual representations of values and rdfs:label of resources. Full-text search supports the Lucene Query Parser syntax. Note that Lucene's default operator is a logical OR when submitting several search terms.

Please note that the search terms have to be URL-encoded.

HTTP GET to http://host/v2/search/searchValue[limitToResourceClass=resourceClassIRI]
[limitToStandoffClass=standoffClassIri][limitToProject=projectIRI][offset=Integer]

The first parameter has to be preceded by a question mark ?, any following parameter by an ampersand &.

A search value must have a minimal length of three characters (default value) as defined in app/v2 in application.conf.

A search term may contain wildcards. A ? represents a single character. It has to be URL-encoded as %3F since it has a special meaning in the URL syntax. For example, the term Uniform can be search for like this:

HTTP GET to http://host/v2/search/Unif%3Frm

A * represents zero, one or multiple characters. For example, the term Uniform can be searched for like this:

HTTP GET to http://host/v2/search/Uni*m

The default value for the parameter offset is 0 which returns the first page of search results. Subsequent pages of results can be fetched by increasing offset by one. The amount of results per page is defined in app/v2 in application.conf.

If the parameter limitToStandoffClass is provided, Knora will look for search terms that are marked up with the indicated standoff class.

If the parameter returnFiles=true is provided, Knora will return any file value attached to each matching resource.

To request the number of results rather than the results themselves, you can do a count query:

HTTP GET to http://host/v2/search/count/searchValue[limitToResourceClass=resourceClassIRI][limitToStandoffClass=standoffClassIri][limitToProject=projectIRI][offset=Integer]

The first parameter has to be preceded by a question mark ?, any following parameter by an ampersand &.

The response to a count query request is an object with one predicate, http://schema.org/numberOfItems, with an integer value.

Gravsearch

For more complex queries than a full-text search, Knora offers a query language called Gravsearch: Virtual Graph Search).

Support of TEI/XML

To convert standoff markup to TEI/XML, see TEI/XML.

IIIF Manifests

This is an experimental feature and may change.

To generate a IIIF manifest for a resource, containing the still image representations that have knora-api:isPartOf (or a subproperty) pointing to that resource:

HTTP GET to http://host/v2/resources//iiifmanifest/RESOURCE_IRI

Reading Resources by Class from a Project

To facilitate the development of tabular user interfaces for data entry, it is possible to get a paged list of all the resources belonging to a particular class in a given project, sorted by the value of a property:

HTTP GET to http://host/v2/resources?resourceClass=RESOURCE_CLASS_IRI&page=PAGE[&orderByProperty=PROPERTY_IRI]

This is useful only if the project does not contain a large amount of data; otherwise, you should use Gravsearch to search using more specific criteria.

The specified class and property are used without inference; they will not match subclasses or subproperties.

The HTTP header X-Knora-Accept-Project must be submitted; its value is a Knora project IRI. In the request URL, the values of resourceClass and orderByProperty are URL-encoded IRIs in the complex schema. The orderByProperty parameter is optional; if it is not supplied, resources will be sorted alphabetically by resource IRI (an arbitrary but consistent order). The value of page is a 0-based integer page number. Paging works as it does in Gravsearch).

Get the Full History of a Resource and its Values as Events

To get a list of the changes that have been made to a resource and its values since its creation as events ordered by date:

HTTP GET to http://host/v2/resources/resourceHistoryEvents/<resourceIRI>

The resource IRI must be URL-encoded. The response is a list of events describing changes made to the resource and its values, in chronological order. Each entry has the properties: knora-api:eventType (the type of the operation performed on a specific date. The operation can be either createdResource, updatedResourceMetadata, deletedResource, createdValue, updatedValueContent, updatedValuePermissions, or deletedValue.), knora-api:versionDate (the date when the change was made), knora-api:author (the IRI of the user who made the change), knora-api:eventBody (the information necessary to make the same request).

For example, the following response contains the list of events describing the version history of the resource http://rdfh.ch/0001/thing-with-history ordered by date:

{
  "@graph" : [ 
        {
            "knora-api:eventType": "createdResource",
            "knora-api:author": {
                "@id": "http://rdfh.ch/users/9XBCrDV3SRa7kS1WwynB4Q"
            },
            "knora-api:eventBody": {
                "rdfs:label": "A thing with version history",
                "knora-api:resourceIri": "http://rdfh.ch/0001/thing-with-history",
                "knora-api:resourceClassIri": "http://www.knora.org/ontology/0001/anything#Thing",
                "knora-api:hasPermissions": "CR knora-admin:Creator|M knora-admin:ProjectMember|V knora-admin:UnknownUser",
                "knora-api:creationDate": {
                    "@value": "2019-02-08T15:05:10Z",
                    "@type": "xsd:dateTimeStamp"
                },
                "knora-api:attachedToProject": {
                    "@id": "http://rdfh.ch/projects/0001"
                }
            },
            "knora-api:versionDate": {
                "@value": "2019-02-08T15:05:10Z",
                "@type": "xsd:dateTimeStamp"
            }
        },
        {
            "knora-api:eventType": "createdValue",
            "knora-api:author": {
                "@id": "http://rdfh.ch/users/9XBCrDV3SRa7kS1WwynB4Q"
            },
            "knora-api:eventBody": {
                "knora-api:resourceIri": "http://rdfh.ch/0001/thing-with-history",
            "knora-api:resourceClassIri": "http://www.knora.org/ontology/0001/anything#Thing",
                "knora-api:valueCreationDate": {
                    "@value": "2019-02-10T10:30:10Z",
                    "@type": "xsd:dateTimeStamp"
                },
                "knora-api:valueHasUUID": "IZGOjVqxTfSNO4ieKyp0SA",
                "knora-api:hasPermissions": "V knora-admin:UnknownUser|M knora-admin:ProjectMember",
                "@type": "knora-base:LinkValue",
                "http://www.knora.org/ontology/0001/anything#hasOtherThingValue": {
                    "knora-api:linkValueHasTargetIri": {
                        "@id": "http://rdfh.ch/0001/2qMtTWvVRXWMBcRNlduvCQ"
                    }
                },
                "rdf:Property": "http://www.knora.org/ontology/0001/anything#hasOtherThingValue",
                "@id": "http://rdfh.ch/0001/thing-with-history/values/3a"
            },
            "knora-api:versionDate": {
                "@value": "2019-02-10T10:30:10Z",
                "@type": "xsd:dateTimeStamp"
            }
        },
        {
            "knora-api:eventType": "updatedValueContent",
            "knora-api:author": {
                "@id": "http://rdfh.ch/users/BhkfBc3hTeS_IDo-JgXRbQ"
            },
            "knora-api:eventBody": {
                "knora-api:resourceIri": "http://rdfh.ch/0001/thing-with-history",
                "knora-api:resourceClassIri": "http://www.knora.org/ontology/0001/anything#Thing"
                "http://www.knora.org/ontology/0001/anything#hasText": {
                    "knora-api:valueAsString": "two"
                },
                "knora-api:valueCreationDate": {
                    "@value": "2019-02-11T10:05:10Z",
                    "@type": "xsd:dateTimeStamp"
                },
                "knora-base:previousValue": "http://rdfh.ch/0001/thing-with-history/values/2a",
                "knora-api:valueHasUUID": "W5fm67e0QDWxRZumcXcs6g",
                "@type": "knora-base:TextValue",
                "rdf:Property": "http://www.knora.org/ontology/0001/anything#hasText",
                "@id": "http://rdfh.ch/0001/thing-with-history/values/2b"
            },
            "knora-api:versionDate": {
                "@value": "2019-02-11T10:05:10Z",
                "@type": "xsd:dateTimeStamp"
            }
        },
        {
            "knora-api:eventType": "deletedValue",
            "knora-api:author": {
                "@id": "http://rdfh.ch/users/9XBCrDV3SRa7kS1WwynB4Q"
            },
            "knora-api:eventBody": {
                "knora-api:resourceIri": "http://rdfh.ch/0001/thing-with-history",
                "knora-api:resourceClassIri": "http://www.knora.org/ontology/0001/anything#Thing",
                "knora-base:previousValue": "http://rdfh.ch/0001/thing-with-history/values/3a",
                "knora-api:deleteDate": {
                    "@type": "xsd:dateTimeStamp",
                    "@value": "2019-02-13T09:00:10Z"
                },
                "knora-api:isDeleted": true,
                "@type": "knora-base:LinkValue",
                "rdf:Property": "http://www.knora.org/ontology/0001/anything#hasOtherThingValue",
                "@id": "http://rdfh.ch/0001/thing-with-history/values/3b"
            },
            "knora-api:versionDate": {
                "@value": "2019-02-13T09:00:10Z",
                "@type": "xsd:dateTimeStamp"
            }
        }
    ],
  "@context" : {
    "rdf" : "http://www.w3.org/1999/02/22-rdf-syntax-ns#",
    "rdfs" : "http://www.w3.org/2000/01/rdf-schema#",
    "xsd" : "http://www.w3.org/2001/XMLSchema#",
    "knora-api" : "http://api.knora.org/ontology/knora-api/v2#"
  }
}

Since the history of changes made to the metadata of a resource is not part of resouce's version history, there are no events describing the changes on metadata elements like its rdfs:label or rdfs:comment. The only record depicting a change in a resource's metadata is the knora-api:lastModificationDate of the resource. Thus the event updatedResourceMetadata indicates a change in a resource's metadata, its knora-api:eventBody contains the payload needed to update the value of the resource's lastModificationDate, see modifying metadata of a resource.

Get the Full History of all Resources of a Project as Events

To get a list of the changes that have been made to the resources and their values of a project as events ordered by date:

HTTP GET to http://host/v2/resources/projectHistoryEvents/<projectIRI>

The project IRI must be URL-encoded. The response contains the resource history events of all resources that belong to the specified project.


Last update: 2022-06-22