Skip to content

PyPI version

The CLI Commands of DSP-TOOLS

Before Starting: Have in Mind the Subdomains of a DSP Server

DaSCH follows some conventions when setting up DSP servers. Most of the commands documented on this page assume that you know how to address the subdomains of a DSP server. There are three relevant URLs you should know about:

  • Subdomains admin/app stand for the DSP-APP frontend that you look at in your browser
  • Subdomain api stands for the DSP-API (where DSP-TOOLS sends its data to)
  • Subdomain iiif stands for the SIPI server interface (where DSP-TOOLS sends the multimedia files to)

This means that for uploading data to the DSP server on the domain dasch.swiss, you have to type the following:

dsp-tools xmlupload -s https://api.dasch.swiss -u 'your@email.com' -p 'password' xml_data_file.xml

If the user input is not correct, DSP-TOOLS tries to guess the correct subdomains. If the provided server is any one of the following:

http(s)://admin.dasch.swiss
http(s)://app.dasch.swiss
http(s)://api.dasch.swiss
http(s)://iiif.dasch.swiss
http(s)://dasch.swiss
dasch.swiss

then DSP-TOOLS will treat it as https://api.dasch.swiss, and derive the SIPI server URL https://iiif.dasch.swiss from it.

This guessing feature comes with a price, though:

  • Only servers ending with dasch.swiss are supported.
  • If a server's configuration differs from the convention described above, DSP-TOOLS will fail.

create

This command reads a JSON project definition (containing one or more data models) and creates it on a DSP server.

dsp-tools create [options] project_definition.json

The following options are available:

  • -s | --server (optional, default: 0.0.0.0:3333): URL of the DSP server
  • -u | --user (optional, default: root@example.com): username (e-mail) used for authentication with the DSP-API
  • -p | --password (optional, default: test): password used for authentication with the DSP-API
  • -V | --validate-only (optional): validate the JSON file without creating it on the DSP server
  • -l | --lists-only (optional): create only the lists (prerequisite: the project exists on the server)
  • -v | --verbose (optional): print more information about the progress to the console
  • -d | --dump (optional): write every request to DSP-API into a file

The defaults are intended for local testing:

dsp-tools create project_definition.json

This will create the project defined in project_definition.json on localhost for local viewing.

In order to create the same project on the DSP server https://admin.dasch.swiss, it is necessary to specify the following options:

dsp-tools create -s https://api.dasch.swiss -u 'your@email.com' -p 'password' project_definition.json

The expected JSON format is documented here.

get

This command retrieves a project with its data model(s) from a DSP server and writes it into a JSON file. This JSON file can then be used to create the same project on another DSP server.

dsp-tools get [options] project_definition.json

The following options are available:

  • -s | --server (optional, default: 0.0.0.0:3333): URL of the DSP server
  • -u | --user (optional, default: root@example.com): username (e-mail) used for authentication with the DSP-API
  • -p | --password (optional, default: test): password used for authentication with the DSP-API
  • -P | --project (mandatory): shortcode, shortname or IRI of the project
  • -v | --verbose (optional): print more information about the progress to the console
  • -d | --dump (optional): write every request to DSP-API into a file

The defaults are intended for local testing:

dsp-tools get -P my_project project_definition.json

will get my_project from localhost.

In order to get a project from the DSP server https://admin.dasch.swiss, it is necessary to specify the following options:

dsp-tools get -s https://api.dasch.swiss -u 'your@email.com' -p 'password' -P my_project project_definition.json

It is possible to get a project from a DSP server without giving credentials. But in this case, the resulting JSON file won't have a "users" section.

The expected JSON format is documented here.

xmlupload

This command uploads data defined in an XML file to a DSP server.

dsp-tools xmlupload [options] xml_data_file.xml

The following options are available:

  • -s | --server (optional, default: 0.0.0.0:3333): URL of the DSP server where DSP-TOOLS sends the data to
  • -u | --user (optional, default: root@example.com): username (e-mail) used for authentication with the DSP-API
  • -p | --password (optional, default: test): password used for authentication with the DSP-API
  • -i | --imgdir (optional, default: .): folder from where the paths in the <bitstream> tags are evaluated
  • -V | --validate (optional): validate the XML file without uploading it
  • -v | --verbose (optional): print more information about the progress to the console
  • -m | --metrics (optional): write metrics into a 'metrics' folder
  • -d | --dump (optional): write every request to DSP-API/SIPI into a file

Output:

  • A file named id2iri_mapping_[timestamp].json is written to the current working directory. This file should be kept if a second data delivery is added at a later point of time see here.

The defaults are intended for local testing:

dsp-tools xmlupload xml_data_file.xml

Will upload the data defined in xml_data_file.xml on localhost for local viewing.

In order to upload the same data to the DSP server https://admin.dasch.swiss, it is necessary to specify the following options:

dsp-tools xmlupload -s https://api.dasch.swiss -u 'your@email.com' -p 'password' xml_data_file.xml

The expected XML format is documented here.

excel2json

This command creates a JSON project definition file from a nested folder structure with Excel files.

dsp-tools excel2json excelfolder project_definition.json

The expected Excel file format and the folder structure are documented here.

excel2lists

This command creates the "lists" section of a JSON project file from Excel files.

dsp-tools excel2lists [options] excelfolder lists_section.json

The following options are available:

  • -v | --verbose (optional): print more information about the progress to the console

The expected Excel file format and the folder structure are documented [here] (./file-formats/excel2json.md#the-lists-section).

Hint
The command excel2json might be more convenient to use.

excel2resources

This command creates the "resources" section of a JSON project file from an Excel file.

dsp-tools excel2resources resources.xlsx resources_section.json

The expected Excel format is documented here.

Hint
The command excel2json might be more convenient to use.

excel2properties

This command creates the "properties" section of a JSON project file from an Excel file.

dsp-tools excel2properties properties.xlsx properties_section.json

The expected Excel format is documented here.

Hint
The command excel2json might be more convenient to use.

excel2xml

This command creates an XML file from an Excel/CSV file that is already structured according to the DSP specifications. This is mostly used for DaSCH internal data migration.

dsp-tools excel2xml data_source.xlsx project_shortcode ontology_name

Arguments:

  • data_source.xlsx (mandatory): path to the CSV or XLS(X) file containing the data
  • project_shortcode (mandatory): shortcode of the project that this data belongs to
  • ontology_name (mandatory): name of the ontology that the data belongs to

The expected Excel format is documented here.

If your data source is not yet structured according to the DSP specifications, you need a custom Python script for the data transformation. For this, you might want to import the module excel2xml into your Python script, which is described here.

id2iri

This command replaces internal IDs of an XML file (<resptr> tags and salsah-links inside <text> tags) by IRIs provided in a mapping file.

dsp-tools id2iri xmlfile.xml mapping.json

The following options are available:

  • -r | --remove-resources (optional): remove resources if their ID is in the mapping

The output file is written to [original name]_replaced_[timestamp].xml.

If the flag --remove-resources is set, all resources of which the ID is in the mapping are removed from the XML file. This prevents doubled resources on the DSP server, because normally, the resources occurring in the mapping already exist on the DSP server.

This command cannot be used isolated, because it is part of a bigger procedure that is documented here.

start-stack

This command runs a local instance of DSP-API and DSP-APP.

dsp-tools start-stack

DSP-TOOLS will ask you for permission to clean Docker with a docker system prune. This will remove all unused containers, networks and images. If you don't know what that means, just type y ("yes") and then Enter.

The following options are available:

  • --max_file_size=int (optional, default: 250): max. multimedia file size allowed by SIPI, in MB (max: 100'000)
  • --latest (optional): instead of the latest deployed version, use the latest development version of DSP-API (from the main branch)
  • --prune (optional): execute docker system prune without asking
  • --no-prune (optional): don't execute docker system prune (and don't ask)

Example: If you start the stack with dsp-tools start-stack --max_file_size=1000, it will be possible to upload files that are up to 1 GB big. If a file bigger than max_file_size is uploaded, SIPI will reject it.

More help for this command can be found here.

stop-stack

When your work is done, shut down DSP-API and DSP-APP with

dsp-tools stop-stack

This deletes all Docker volumes, and removes all data that was in the database.

template

This command creates a template repository with a minimal JSON and XML file.

dsp-tools template

rosetta

Clone the most up to date rosetta repository from GitHub into ~/.dsp-tools, create its data model and upload its XML file.

dsp-tools rosetta

A DSP stack must be running before executing this command.

process-files

DaSCH internal command to process multimedia files locally, before uploading them to a DSP server. See here for more information.

upload-files

DaSCH internal command to upload processed multimedia files to a DSP server. See here for more information.

fast-xmlupload

DaSCH internal command to create the resources of an XML file after the processed multimedia files have been uploaded already. See here for more information.


Last update: September 12, 2023